|
Nitrogen Purge and Blow Gun Kits:
GENTEC® Nitrogen Purging and Blow Gun
Kits include a chrome-plated compressed air blow gun with Standard Safety Tip
and solid brass internal parts. The blow gun is lightweight and designed to fit
comfortably in the user’s hand. It complies with OSHA 1910.242b and 1910.95
which require that compressed air be limited to 30 PSI at the nozzle outlet. The
safety tip includes a safety by-pass which prevents excessive pressure build-up
in the gun if the nozzle becomes clogged. Accessories, such as high or
low-pressure regulators, blow gun hose, standard safety tip, rubber tip for
blowing out lines and 6” extension needle tip are available. GENTEC® Nitrogen
Purging and Blow Gun Kits include choices for high-pressure regulators for
Nitrogen and carrying cases for 20 or 40 cu. ft. cylinders.
452 NITROGEN & CO2
Purging Series Regulators
Regulators
are designed for purging/pressure testing with Nitrogen ("IN" series) or
Carbon Dioxide ("C" series).
- 2" Gauge and 2-3/4"
diaphragm
- Stem type seat
assembly for more reliable seating
- Forged brass body
- Chrome-plated
housing cap
- Self re-seating
external pressure relief valve
- Sintered bronze
inlet filter
- UL Listed
MODEL #
|
GAS SERVICE |
MAX. INLET PRESSURE (PSI) |
MAX. DELIVERY PRESSURE (PSI) |
INLET GAUGE |
OUTLET GAUGE |
INLET CONNECTION |
OUTLET CONNECTION |
|
Carbon Dioxide |
|
452C-300-F |
3000 |
20-300 |
2", 4000PSI |
2", 400PSI |
CGA 320 |
1/4" SAME Flare |
|
Nitrogen |
|
452IN-300-F |
3000 |
20-300 |
2", 4000PSI |
2", 400PSI |
CGA 580 |
1/4" SAME Flare |
|
452IN-450-F |
3000 |
30-450 |
2", 4000PSI |
2", 600PSI |
CGA 580 |
1/4" SAME Flare |
1
psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar =
0.07 kgf / cm2,
1 SCFH = 0.0283 m3/h = 0.472 LPM
|
|
|
|
NITROGEN TANK STANDS
|
 
CRT20N CRT40N |
NITROGEN PURGING ACCESSORIES
NITROGEN 6' HOSE = Blow Gun Hose
Nitrogen Tanks
20-CF
Nitrogen Tank 40-CF Nitrogen Tank
Third Party Trademark & Brand Notice
| 
WWW.TORCHTOOLS.COM™
